In this option, please choose if you would like your control(s) on the right hand side or the left hand side. We recommend choosing the side which is easiest to reach.
A 4" Square Cover is meant to hide the Roller Shades Controls and Tube while also preventing light gaps coming in from the top of the window. This Cover gives your shades a very distinct and clean look. Here is a picture of the Cover on a Blackout Vinyl Shade , Color White...
Please select what color you would like your chain to be. Usually shades are made with white controls and chain.
Here is a picture of two Drive Chain in White Plastic and Metal.
Installation prices include re-measurements and any additional hardware required. This option required the local delivery method.
$ 80 installation.Prices are subject to change according to the city and depending on the difficulties of the place.ordering in Miami or Broward 1 to 3 blinds = $ 80ordering in Miami or Broward 4 to 8 blinds = $ 50ordering in Miami or Broward 9 and more = $ 25
Upgrade to the ultimate in convenience with a motorized shade. With this option you will be able to control your new shades with a touch a button. Our motors come standard with a 5 channel control so you may control up to 5 shades at one time! Also included will be a wall mount for your remote control. If you need help deciding how many motors you will need, please give us a call. Here is a picture of the Modern Remote Control for motors you will be receiving...
Side channels cover and close the gap between the blinds and the wall; thus allowing almost no light to pass through. Please select the height of the window on the drop-down menu and we will make the deductions.
For Mount please select either Inside or Outside Mount.
Inside Mount means that you will be installing your new blinds inside your window frame.
Outside Mount means that you will be installing your new blinds outside your window frame, either on wall or ceiling.
Here are some of our tips on how to measure...
WIDTH: Measure the width of the window opening in 3 places (top, middle, and bottom). Take the smallest of the 3 measurements (rounded to the nearest 1/8 inch) and write it down. This is the width you will order. Do not make any deductions! The factory will make any necessary deductions.
HEIGHT: Measure the window opening height in 3 places (left, middle, right) but this time take the largest measurement (rounded to the nearest 1/8 inch). This is the height you will order. The factory will make no deductions or additions to the length measurement. NOTE: THIS DOES NOT APPLY TO VERTICAL BLINDS. FOR VERTICAL BLINDS, IT WOULD BE THE SMALLEST.
WIDTH: Measure the width of the window opening from left to right and add 4"to 6" for maximum light gap coverage and privacy. If the shade is to be mounted to trim or framing around the window measure from the trim's outside edge left to right. Keep in mind that on roller shades the factory will NOT make deductions from your measurements on both the barrel and fabric. Once you determine the desired width (rounded to the nearest 1/8 inch) write it down.
HEIGHT: To determine the height measure the window opening from top to bottom and add 2" to 4" inches to this measurement to allow space for mounting brackets above the opening.
Inside Mount Outside Mount
In this option, please choose if you would like your motor(s) on the right hand side or the left hand side. We recommend choosing the side which is easiest to reach.
There are no reviews yet.
You must be logged in to post a review.
How can we help you ? Como podemos ayudarte ?